Find 5000 Series Aluminum Coil, 5052H32 Aluminum Coils, Aluminium Roofing Coil on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Aluminum Coil > 5000 Series Aluminum Coil > ASTM 5052 aluminium alloy coil for transportation vehicle

ASTM 5052 aluminium alloy coil for transportation vehicle

Basic Info

Model No.: 5052

Product Description

Specifications ASTM 5052 aluminium alloy coil for transportation vehicle

Thickness: 0.3-6.0mm

Width: 10-1200mm

ISO9001,ISO14001,MSDS,SGS

        Founded in 2004, Suzhou Southeast Aluminum Sheet Co., LTD. is a manufacturer of aluminum material located in Suzhou, Jiangsu Province.      Our company is mainly engaged in processing and sales of aluminum, we have one 2050mm and one 1250mm kaiping machine, one 1250mm slitting shear line, one 650mm slitting shear line, one 2100mm, one 1450mm and one 650mm tenso-shear line, five 1300mm and one 1250mm shearing lines, and two set of film laminating. Because of the above machine our production ability will be about 7000 tons every month.     Our main products include 1xxx series, 3xxx series, 5xxx series, 6xxx series and 8 xxx series aluminum sheets, aluminum plates, aluminum coils, aluminum strips, Aluminum Foil and so on, thickness vary from 0.1mm to 20mm. Our main market is Canada, Ukraine, Russia, Cuba, Bosnia, Thailand, Vietnam, Korea, Egypt and worldwide.     Our company has passed international quality management system ISO9001:2008 and International Environmental Management System ISO14001:2004. All of our products meet GB/T 3880-2006 quality standard and have past SGS test, you can be result assured of the quality. Insist on the principle of create value for customer, we believe we will be one of your best partner.   We Suzhou Southeast Aluminum Sheet Co. Ltd specialized in producing aluminum sheet, Aluminum Coil , and Aluminum Strip, Aluminum Plate and aluminum foil. Our main products are8011,1050,1060,1070,1100,3003, 3004,3005,3105,5052,5005, 5754, 5083, 6061. Temper:O-H112. The thickness of our products varies from 0.1mm-6mm. For aluminum coil the width is from 10mm -1250mm. For aluminum sheet the width is from 50mm-1250mm. Other size will made based on customer’s requirement. We have passed ISO9001:2008 certificate of Quality Management System and ISO14001:2004 certificate of Environment Management System. At the same time we produce strictly according to the Industry Standard. Payment Terms :30%TT in advance and the balance before shipment by TT or 100% L/C at sight             Characteristics This is a non-heat treatable alloy that is weldable. It is hardened by cold work. It has good forming characteristics and good corrosion resistance, including resistance to salt water. (1) Machinability
This alloy has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may (2) Forming
AL 5052 is readily formed at room temperature. Successive cold working decreases the formability. (3) Corrosion Resistance
Corrosion resistance to salt water and general atmospheric conditions is good. (4) Welding
This alloy is readily welded by conventional methods. When filler rod is required it should be aluminum alloy 5356 as filler. Either tungsten or consumable electrode inert gas shielded arc welding is preferred method. (5) Heat Treatment
AL 5052 cannot be hardened by means of heat treatment. It does harden due to cold working. (6) Forging
The alloy may be forged in the temperature range of 950 F down to 500 F. (7) Hot Working
Hot working, as with forging, may be done in the range of 950 F to 500 F. (8) Cold Working
The alloy cold works readily and may be formed by drawing or spinning. However the amount of cold work imparted by spinning makes intermediate annealing necessary. (9) Annealing
Anneal at 650 F and air cool. (10) Hardening
Hardens only from cold working.  (11) Other Physical Props
Electrical conductivity 33% of copper. (12) Other Mechanical Props
Shear strength for O temper is 18 ksi. For cold worked temper H 34 it is 21 ksi. Typical Application
Commonly used in the manufacture of hydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, and appliances. Commonly used in sheet metal work and in sheet metal parts. Mechanical Properties

 Tensile Strength

 196-266MPa

 Yield Strength

 91-127MPa

 Elongation

 10-25

 Brinell Hardness

 47-68

 

Contact us if you need more details on Aluminium Coil 5052 H14. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminium Coil Weight、Aluminium Foil Strip. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminum Coil > 5000 Series Aluminum Coil